Hot Rolled Steel:SPHC / SPHD/SPHE
Showing the single result
Fullgreat supplies hot-rolled steel as coil, sheet, strip and plate, with black, oiled, and pickled-and-oiled options. Choose the material around the part’s forming demands, service load and next processing step.
Choose Hot-Rolled Steel for Your Part
Formed & Fabricated Components
For bent brackets, pressed parts and other formed components, consider the most demanding bend or drawn feature. SPHC, SPHD and SPHE are forming-grade designations; grade and supplied condition affect suitability for the operation.
A simple folded part and a deeply drawn component place different demands on the steel. Select for the actual forming sequence, rather than strength alone.
Structural & Load-Bearing Components
For frames, supports and structural fabrication, start with the specified strength and design requirements. The product page includes JIS G3101, SAE J1392 and ASTM A36 / A283 grade references with their applicable conditions.
These standards have separate requirements. The purchase specification should identify the standard, edition and grade, together with any welding or testing requirements for the component.
Choose the Surface for the Next Operation
Black hot-rolled steel retains mill scale. Pickled and oiled steel has the scale removed and an oil film applied for temporary protection.
This distinction matters when planning cleaning, forming or painting. The downstream process determines the surface preparation needed; an oil film serves a different purpose from a permanent protective coating.
Choose coil or sheet to suit your feed and cutting process. Strip and plate have separate thickness ranges, while pickled-and-oiled coil has its own width range.
View Hot-Rolled Steel Sizes, Grade References & Supply Options →
The product page lists dimensions by supply form, composition and mechanical-property references, and the details needed for a quotation.
Comparing processing routes? Read the hot-rolled vs cold-rolled steel guide for differences in surface, dimensional requirements and downstream processing.
Preparing an enquiry? Send your specification or application with the product form, grade, thickness, width, surface condition and quantity.

