業界ニュース

非磁性ステンレス鋼の価格ガイド [2026]

工場検査台上の冷間圧延非磁性ステンレス鋼ストリップコイルとデジタルノギス

新しいプロジェクトの予算を立てる場合, finding an accurate 非磁性ステンレス鋼の価格 is essential for precision electronics, 医療器具, and high-end hardware manufacturing. Because primary alloy surcharges (ニッケル, クロム, とモリブデン) fluctuate regularly on global exchanges, material costs are quoted dynamically based on chemical grade, target magnetic permeability (メートル), and slitting precision.

これ 2026 pricing benchmark and engineering guide explains current cost levels, breakdowns, and how to source certified non-magnetic alloys directly from the mill.

工場検査台上の冷間圧延非磁性ステンレス鋼ストリップコイルとデジタルノギス
Precision slit non-magnetic stainless steel coils ready for export inspection.

1. 2026 Non-Magnetic Stainless Steel Price Benchmarks by Grade

Unlike commercial stainless steels, true non-magnetic grades undergo balanced alloy formulation (high nickel/nitrogen stability) and vacuum bright annealing to suppress martensite formation during cold rolling and stamping. Below is an overview of baseline price tiers across standard industrial grades:

Grade Category透磁率 (メートル)代表的な用途Relative Price Index (FOB中国)
Stable Austenitic
(Enhanced 304 / 304L)
μ ≤ 1.02 – 1.05Consumer electronics housings, luxury zipper hardware, 装飾トリムベースライン ($)
High-Corrosion Non-Magnetic
(High-Nickel 316L / 316LVM)
μ ≤ 1.01 – 1.02Chemical valves, marine sensors, pharmaceutical vessels+25% に +35% over baseline
Ultra-Low Permeability / 医学
(Custom Austenitic Alloys)
μ ≤ 1.005MRI medical devices, camera OIS springs, magnetic shielding shieldsCustom Quote by Slitting Specs

*注記: The exact price per kilogram or ton depends on thickness, slit width tolerances, 表面仕上げ, and current nickel market indexes. Contact our sales engineers for an official daily mill quote.


2. Why True Non-Magnetic Steel Costs More Than Commercial 304

A frequent question from purchasing managers is: “Why does true non-magnetic strip carry a premium over commercial 304 コイル?”

  1. Suppression of Strain-Induced Martensite: 標準 304 is technically austenitic (non-magnetic in an annealed state). しかし, 重冷間加工, 曲げ, or stamping transforms unstable austenite into ferromagnetic martensite, making the finished part magnetic.
  2. Vacuum Bright Annealing Cycles: To guarantee μ < 1.005 or μ < 1.01 形成後, the material requires specialized vacuum bright annealing and controlled cooling to restore a completely homogeneous austenitic matrix.
  3. Dedicated Magnetic Testing: Every batch is verified using digital magnetic permeability meters rather than simple hand magnets, ensuring compliance with strict electronic or medical standards.

For deeper metallurgical analysis on crystal structures and permeability ratings, refer to our comprehensive Non-Magnetic Stainless Steel Definitive Guide.


3. の 4 Key Drivers Determining Your Final Quotation

When requesting a formal quotation, four technical specifications directly dictate the final 非磁性ステンレス鋼の価格 and processing surcharge:

  • 厚さ & Width Tolerances: Precision slitting to ultra-tight tolerances (例えば, ±0.01 mm for precision spring components) requires specialized tungsten carbide slitting knives and tension levelling lines, which adds precision slitting surcharges compared to standard slitting.
Industrial rotary slitting machine cutting precision non-magnetic stainless steel strip with tight width tolerances
High-precision slitting lines equipped with tungsten carbide knives for tight width tolerances.
  • Magnetic Permeability Threshold (μ Level): Tighter magnetic requirements (such as μ ≤ 1.005 MRIコンポーネント用) demand strict chemical composition controls at the melting stage, leading to higher metallurgical costs.
  • 角 & Surface Preparation: Deburred edges, round safety edges (for prolonged stamping die life), 2B finishes, or 8K mirror polishing with anti-fingerprint coatings all affect the final price structure.
  • 音量 & Sea-Worthy Packaging: Full Container Load (FCL) orders achieve the lowest per-ton shipping and manufacturing costs. For development projects, we provide trial sample coils packaged in fumigated wooden boxes with desiccants and anti-rust barrier paper.

4. Cost-Saving Recommendations for Overseas Buyers

To optimize procurement costs without compromising functional performance:

  • Select Standard Widths Where Feasible: Custom micro-slit widths generate more cutting scrap. Aligning dimensions with standard slit multiples reduces overall yield loss.
  • Clarify Permeability Requirements Upfront: If your component only requires μ ≤ 1.02 rather than surgical-grade μ ≤ 1.005, communicating your threshold avoids over-specifying and unnecessary material premiums.
  • Request Mill Certification with Orders: Ensure your supplier issues a traceable で 10204 3.1 ミルテスト証明書 (MTC) to prevent batch rejection and costly secondary inspections.
Printed EN 10204 3.1 Mill Test Certificate with non-magnetic stainless steel sample strip and testing gauge
Ultra-thin precision slit coil ready for sea-worthy export packaging and inspection.

Request Today’s Factory Direct Price Sheet & サンプル

Need an accurate quotation for your engineering project? Fullgreat operates precision slitting lines, supplying cold-rolled non-magnetic stainless steel coils, ストリップ, and wires worldwide.

To receive an immediate quote (EXW, FOB, or CIF), please provide:

  • Target grade or required permeability value (メートル)
  • 寸法: Thickness × Width (mm)
  • Estimated order quantity (kgまたはトン)
  • Destination sea port or airport

Response Guarantee: Our technical export team reviews inquiries and delivers an official quotation, chemical data sheet, and MTC sample within 12 営業時間.

Looking for factory-direct production orders? Explore our complete inventory and slitting specifications for 非磁性ステンレス鋼のストリップおよびコイル.

Send Inquiry & Request Quote View Non-Magnetic Products

5. Frequently Asked Commercial & Purchasing Questions

Q1: 最低注文数量はいくらですか (MOQ)?

あ: For stock items and standard slit widths, MOQ starts from 100 kg to 500 kg. For custom alloy smelting runs or specialized dimensions, trial coils are supported for mold qualification.

第2四半期: Can Fullgreat provide third-party verification?

あ: はい. Alongside our internal EN 10204 3.1 MTC, we regularly coordinate with third-party inspection agencies (such as SGS, テュフ, or BV) for chemical analysis and magnetic permeability testing upon client request.

Q3: How long remains a formal price quotation valid?

あ: Due to raw nickel and ferrochrome fluctuations on the London Metal Exchange (LME), official quotations are typically valid for 7 に 14 日.

返信を残す

あなたのメールアドレスは公開されません. 必須フィールドにマークが付いています *